Sound Devices MixPre-10 II 10-Channel / 12-Track Multitrack 32-Bit Field Recorder

The Sound Devices MixPre-10 II multitrack field recorder is an ideal tool. Record up to ten tracks of external sources (eight channels via XLR-1/4" combo jacks and two channels via a 3.5mm mini jack) plus a stereo mix at up to 32-bit / 192 kHz while monitoring your audio in headphones.

The MixPre-10 II offers many upgrades over its predecessor. Chief among these features is the ability to record at 32-bit floating point. This makes it nearly impossible for you to clip (distort) audio on the way in. Whether you're recording hot or making use of the unit's astounding 142 dB dynamic range, you'll only be handicapped by the quality of your microphone.

The device sports the same Kashmir preamps as the MixPre-10T with one key difference: an even lower noise floor, at 130 dBV. With line-level XLR and 3.5mm outputs, you can monitor in both headphones and on a compatible line-level device at the same time. Timecode connections are made possible via BNC, HDMI, and 3.5mm connections.

All of this is available in an eight-channel package that can be powered from wall chargers, AA batteries, or Sony L-series batteries. Whether you use the device in an advanced or basic capacity, the MixPre-10 II will suit any intimate, field-based production.

Key Features:

• Kashmir microphone preamps with 48V phantom power
• Internal timecode generator
• Sample rates up to 192 kHz
• Bit depths up to 32-bit float
• Adjustable limiters
• SD card recording and reading
• Backup to USB drive
• 10 seconds of pre-roll at 48 kHz
• USB control surface support
• Customize with plugins
• Add low cut, high pass, delay, polarity invert, and panning
• Simultaneous recording, mixing, and USB audio streaming
• Trigger record via timecode or HDMI timecode
• Bluetooth for wireless control via Wingman app
• Basic, advanced, and custom modes
• High-fidelity headphone amplifier