The EB-424L is a V-Mount power base station designed for use in environments where voltage and current capacity are a challenge. High-end broadcast camera systems (such as Sony F23, Sony F35, RED ONE) have specific power requirements that can be fulfilled by the EB-424L. Power Base mode also provides a battery backup station to the camera should the main AC become disconnected or fail at any stage, so that no critical production material is lost or shooting is delayed. The EB-424L has two output terminals�industry standard 12V and professional 24V. Both voltages can be used either separately or simultaneously.
EB-424L Product Features:
- Supports up to Eight (8) ENDURA batteries when in PowerLink
or dual stack configuration providing up to 744Wh with the
maximum number of batteries in use.
- Features uninterrupted battery change-over during normal
operation.
- Selection of 12V or 24V output voltage of the LEMO connector
via a dedicated 24V output switch. Activation of power switch
turns on pilot LED; 24V is output from the LEMO connector.
Additionally, 12V output is always continuous from both the
LEMO and XLR connector depending on how the cable/pin is
configured (when the 24V switch is active).
- Compact, lightweight and durable design with extendable feet
for use on location, in studio and desktop surfaces.
- Maximum current of 12V is 20A (10A each output); in 24V
operation, the maximum current is 5A.
- LED Indicator for 24V output includes detection of protection
circuit, dual low voltage warning when below 14V and 12V.