Shure SM7B Vocal Microphone +Gator Desk-Mounted Broadcast/Podcast Boom Arm Bundle

Shure SM7B Vocal Microphone +Gator Desk-Mounted Broadcast/Podcast Boom Arm Bundle

• The Shure SM7B is a vocal microphone with a smooth, flat, and wide-range frequency response appropriate for music and speech in professional audio applications. The mic's specially engineered dynamic capsule provides a smooth, polished vocal sound with a rich response in the lower frequency registers, making the mic a favourite choice among broadcasters and podcasters.

  It features a cardioid polar pattern, bass roll-off, and midrange emphasis (presence boost) controls, and shielding against broadband interference. An internal air suspension shock isolation helps to eliminate mechanical noise transmission, and a yoke mount facilitates mounting and provides precise control of the mic position.

  Flat, Wide-Range Frequency Response

   

  The flat-frequency response enhances the midrange and high frequencies that are associated with the human voice.

   

  Rejection of Electromagnetic Hum

   

  Improved rejection of electromagnetic hum—optimized for shielding against broadband interference emitted by computer monitors.

   

  Air Suspension Shock Isolation

   

  Internal air-suspension shock isolation virtually eliminates mechanical-noise transmission.

   

  Pop Filter

   

  The detachable close-talk windscreen eliminates the need for any add-on protection against explosive breath sounds—even for close-up vocals or narration.

   

  Cardioid Polar Pattern

   

  The classic cardioid pick-up pattern is designed to reject off-axis audio, so you can sing or speak at a comfortable angle. And, it captures the sound with minimum coloration, isolating the signal source helps to reduce feedback issues.

• With 360° of rotational adjustment and an internal XLR cable, the Gator Cases Frameworks Desk-Mounted Broadcast/Podcast Boom Arm Mic Stand is designed for smooth and easy microphone positioning in radio, broadcast, voiceover, and podcast production applications.

  The stand easily clamps to a desk or table and features a spring-loaded articulating boom arm that provides up to 38.5" of extension. The steel construction and metal springs ensure stable operation and toughness while the black powder-coat finish protects the stand against scratches.

  • Ideal for broadcasts, podcasts, and recording
  • Holds one microphone weighing up to 2.6 pounds
  • Spring-loaded articulating arm allows 38.5" extension
  • 360° rotational adjustment with minimal noise
  • Internal 10' XLR cable for clean look and organization
  • Clamps to a desk, table, or surface up to 2.2" thick
  • Sturdy steel construction with metal coil springs
  • Durable black powder-coat finish

• Microphone

  Primary Applications Studio Recording, Broadcast

  Sound Field Mono

  Operating Principle Pressure Operated

  Capsule Dynamic

  Polar Pattern Cardioid

  Orientation End Address

  High-Pass Filter Yes

  On-Board Controls HF, High-Pass Filter

  Windscreen Foam (Included)

  Performance

  Frequency Range 50 Hz to 20 kHz

  Impedance 150 Ohms

  Sensitivity -59 dBV/Pa at 1 kHz

  Connectivity

  Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic)

  Physical

  Color Gray

  Mounting Mic Clip/Stand Adapter (with Included Hardware)

  Mounting Thread Size 5/8"-27 Female

  Included Case None

  Included Filters None

  Construction Material Aluminum, Steel

  Dimensions ø: 2.5 x W: 0.15 x L: 7.47" / ø: 63.5 x W: 3.77 x L: 189.7 mm

  Weight 1.69 lb / 766.57 g

• Form Factor Studio Microphone Arm with Mount

  Colour Black

  Total Reach 38.5" / 97.8 cm

  Thread Size 5/8"-27

  Arm Length 20.7" / 52.5 cm (Arm 1) 19.3" / 49 cm (Arm 2) 2.8" / 7 cm (Thread/Mic Arm)

  Rotation Range 360°

  Load Capacity 2.6 lb / 1.2 kg

  Included Cable Integrated

  Cable Length 10' / 3 m

  Audio Connector Type XLR 3-Pin

  Clamp Range 2.2" / 5.5 cm

  Construction Material Steel

  Weight 3 lb / 1.4 kg