Tilta Nucleus-M Wireless Follow Focus System

Tilta Nucleus-M Wireless Follow Focus System

The Tilta Nucleus-M Wireless Follow Focus System features a 1000' transmission range and comes with two lens drive motors with built-in wireless receivers, a FIZ hand controller, and two handgrips—one to control focus, and the other iris and zoom. The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors, which enables you to freely swap or interchange each motor. The motors power by daisy-chaining using the 7-pin cables, and each motor includes a 19mm rod clamp with 19 to 15mm reducing bushing.

The FIZ hand controller allows you to control focus, iris, and zoom and includes a neck strap. The handgrips feature adapters that enable mounting the controllers onto ARRI-compatible rosettes or onto 25/30mm diameter rods, such as those used with gimbals. The system comes packed in a waterproof hard case that protects your gear during transport and storage.

Features:

• The motors feature cine standard 0.8 MOD 32 pitch drive gears. Each motor includes a 19mm rod clamp and a 15 to 19mm adapter bushing, allowing you to mount the motors onto either a 15mm or 19mm rod.
• The motors power from a D-Tap connector, and then pass power by daisy-chaining via the 7-pin connectors with the included cables.
• The FIZ hand controller and each handgrip power via two 18650 3000mAh, 3.7V Li-ion batteries.
• The batteries in the FIZ hand controller will last for more than 10 hours, and up to 48 hours in each handgrip, when idle.
• The system features three ranges: low, medium, and high. It supports up to 15 channels to select from, and the controllers' pair with each motor via the motor ID.
• The FIZ hand unit can control three channels (focus, zoom, and iris), as well as override the handgrips.
• The motors can calibrate on lenses with or without hard stops, such as a photo lens with follow focus gears.

Please note that batteries are not included and must be sourced separately.

Wireless Range 1000' / 304 m

Batteries Required Hand Controller: 2 x 18650 Handgrip: 2 x 18650 in each Note: Battery must have a raised anode (positive) end, not a flat end

Power Batteries 3.7 VDC, 3000 mAh Battery Charger 100 to 240 VAC, 50/60 Hz, 0.15 A 5 VDC, 2 A

Dimensions Motor 4.50 x 3.25 x 1.38" / 11.43 x 8.26 x 3.49 cm Battery Diameter: 0.6875" / 1.7463 cm Length: 2.5625" / 6.5088 cm

Weight Motor 0.42 lb / 0.19 kg 0.50 lb / 0.22 kg (with 15mm rail adapter) 0.49 lb / 0.22 kg (with 19mm rail adapter) FIZ Hand Unit 0.97 lb / 0.44 kg (with focus disk, no batteries) 1.16 lb / 0.53 kg (with focus disk and batteries) Handgrips Right Grip: 0.58 lb / 0.26 kg (no batteries or adapters) Left Grip: 0.53 lb / 0.24 kg (no batteries or adapters) Rosette Rosette Male to Handle Grip Adapter: 0.16 lb / 0.07 kg 25 mm/30 mm Gimbal to Handle Grip Adapter: 0.10 lb / 0.04 kg