Cameras & Rigs - Spring Clearance 25

Main Features

• Cheese Plate with 15mm Rod Clamp
• Compatible with V-Mount Battery Plate
• Multiple 1/4"-20 and 3/8"-16 Threads
• Aluminum Construction

Main Features

• Relieve Stress on Arms & Shoulders
• Requires Sling Handgrip for RS Series
• Adjustable 37 to 60" Crossbody Strap
• Hangs Around Neck to Keep Hands Free
• 30kg Load Capacity
• 1/4"-20 Screw Mount, QD Connectors
• 1/4"-20 & 3/8"-16 Threads for Tripod Use
• Aluminium Mount, Polyester Strap

Main Features

• Specifically designed mini NATO rail for attaching to DJI RS 2 / RS2 / RS3 / RS3 Pro / S3 mini / S4 / RS4 Pro stabilizers.
• Features a quick-release design for swift installation of accessories like the magic arm (ID 4490) and monitor mount (ID 4637).
• Equipped with a 1/4"-20 threaded hole for attaching accessories.
• Secures the stabilizers on both left and right sides with two M4 anti-deflection screws, protecting the stabilizer rail from scratches.

Main Features

• Specifically designed horizontal Arca-Swiss quick-release plate for DJI RS 2 / RSC 2 / RS3 / RS 3 Pro / RS 3 mini / RS 4 / RS 4 Pro. Can be directly mounted onto camera cages with an H38 Arca-Swiss quick-release plate at the bottom (ID 4481).
• The overall center of gravity is lowered by 9.5mm / 0.37in, facilitating easier leveling on the RS 3 mini stabilizer and enabling compatibility with heavier cameras.
• Features an adjustable anti-slip design of the Arca-Swiss quick-release baseplate to prevent accidental equipment detachment.
• Quick release design enables swift assembly and disassembly, facilitating rapid transitions between stabilizer and tripod setups.
• Anti-twist design of the Arca-Swiss quick-release plate for secure camera mounting ensures stability during operation.

Main Features

• Sony FX3 XLR Handle dedicated extension rig.
• Extend 30mm backward and increase grip space.
• Integrated Cold Shoe & removable NATO rail.
• Multiple 1/4"-20 & 3/8"-16 & ARRI 3/8"-16 Accessory Threads.

Main Features

• It includes 2pcs of super lightweight 15mm-Railblock.
• Each Super Lightweight 15mm-Railblock comes with two-rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts.
• The adjustment of one wingnut will not affect the operation of the other wingnut.
• It is equipped with an abundance of 1/4?? threaded holes for DIY operations.

Main Features

• Stretchable mounting point allowing for quick switching between 1/4"-20 locating screw and ARRI 3/8"-16 locating screw.
• Ergonomic design, and supports to be used by left & right hand interchangeably for improved grip experience.
• The strong and durable handle is made of high-strength aluminum alloy and features silicon pads on the contact surface with the palm, which are anti-freeze and anti-slip.
• Allows 36mm vertical adjustment to get the best grip position according to the camera size.
• Features built-in mounting points to meet multiple shooting scenes, such as 1/4"-20 threaded hole, 1/4"-20 locating hole, strap hole, and cold shoe.

Main Features

• Dedicated handle that fits seamlessly into Nikon Z f.
• Skin-friendly, anti-slip, and ergonomic silicone handle for better grip.
• Lightweight and portable, weighs only 102g.
• Arca Swiss quick-release plate for Arca-type tripods.
• Locks conveniently via one 1/4"-20 thumbscrew with D-ring.

Main Features

• Lightweight and compact.
• New design of appearance and color fit in with Sony FX6.
• A removable side plate helps balance the camera when it shoots vertically.
• V mount battery plate and power cable for an extra power source.
• Built-in 1/4''-20 locating holes (same as those in the camera), 1/4"-20 threaded holes, 3/8"-16 threaded holes, ARRI 3/8"-16 locating holes, cold shoe mount for the microphone, image transmitter, monitor, etc.

Main Features

• Designed specifically for DJI RS 4 / RS 4 Pro / RS 3 / RS 3 Pro / RS 3 mini / RS 2.
• Crafted from lightweight carbon fiber for reduced weight and secure accessory attachments.
• Features anti-slip padding along the tube for a stable grip, enabling effortless shooting at different angles.

Main Features

• Bottom Mounting Pate
• For Select RS Gimbal Stabilizers
• Scale on Either Side
• Serrated Slot Design

Main Features

• Bottom Mounting Pate
• For Select RS Gimbal Stabilizers
• Scale on Either Side
• Serrated Slot Design

Main Features

• For DJI RS 3 and RS 4 Pro Gimbals
• Focus Pro LiDAR, Focus Pro Motor
• Focus Pro Grip, Focus Pro Hand Unit
• Carrying Case

Main Features

• Lowers the center of gravity by 15mm, easier balancing, compatibility with heavier cameras, and no block to camera movement.
• Clear auxiliary leveling scale for quick balancing and switch between horizontal and vertical shooting.

Main Features

• Designed for DJI RS 3 Gimbal
• Mounts on Camera, Powers from Camera
• 43,200 Ranging Points
• Built-In Camera with 70-Degree Field of View
• 14m Detection Range, 30mm Focal Length
• Wide Mode and Spot Mode
• Works with Focus Motor for Autofocus

Main Features

• 2-8kg Payload
• Compatibility with All Single Handle Gimbals
• 20-30% Reduction in Verticle Bounce
• Portable and Comfortable During Shooting
• 3.05kg Net Weight

Main Features

• Designed for the DJI RS 2 Gimbal
• Stabilizer Arm with Support Vest
• Easy Assembly and Transport
• Wireless Thumb Controller and Receiver
• V-Mount Battery Plate
• Smartphone and Monitor Brackets
• Easy High and Low Modes

Main Features

• Design for DJI RS 2/ RSC 2 & Ronin-S and ZHIYUN gimbals.
• Balance front-heavy cameras on the gimbal.
• Clamps onto the rear of Manfrotto camera plate with thumbscrew.
• Multiple 1/4"-20 threaded holes for adding counterweights.
• 2 x 100g counterweights Included

Main Features

• Designed for DJI RS 2/RSC 2/ RS 3/RS3 Mini/RS 3 Pro
• Features 1/4°-20 & ARRI 3/8°-16 & cold shoe accessory mounts.
• Clamps to the side of RS 2/RSC 2 via quick-release NATO clamp.
• Anti-removal stud to secure the accessory from falling by accident.
• Compatible with original DJI RS 2 smartphone mount.
• Matte surface perfectly matches with the industrial design of gimbal.

Main Features

• Connects the camera's Micro-HDMI port with the Mini-HDMI port in the DJI Ronin RavenEye Image Transmission System
• Compatibility: Ronin-S, Ronin-SC, DJI RS 2, DJI RSC 2

Main Features

• For Use with RS2, RS3 Pro

Main Features

• Allows Better Responsiveness to Quick Movements
• Works with Ronin-S, DJI RS 2, RS 3 Pro via Adapter Cable
• Works with Ronin 4D via DJI Ronin 4D Hand Grips Mount Universal Adapter

• Miniature Action Camera with Action Pod
• 1/1.28" Sensor | 50MP Photos, 4K60 Video
• 200-Minute Battery Runtime
• Studio-Grade Audio Modes
• Waterproof up to 33'
• Enhanced 2.7K PureVideo Mode Capture
• Flow-State Stabilization, 6-Axis Gyro
• 2.5" Flip Touchscreen Display
• Bluetooth and Wi-Fi, Voice Control 2.0
• Additional Mounting Components

• Compact, Ergonomic Top Handle
• 1/4"-20, 3/8"-16, and ARRI-Style Threads
• 2 NATO Rails, 2 Shoe Mounts
• Bubble Level, Molded Rubber Grip
• Mounts on Rig Using NATO Clamp
• Built-In Allen Wrench

Main Features

• Quick Release Arca-Type Plate
• 15mm LWS Rod Clamp
• Height Adjustable within 0.78" Range
• 0.71 to 1.5" Height from Center Rods
• Tilta Dovetail & 1/4"-20 Threads on Base
• 1/4"-20 Camera Screw
• Load Capacity up to 10 lb
• Durable Aluminum Construction

• For STORM 80c Light
• 15 to 40° Variable Beam Angle
• Intensifies Output by 5.5x to 36,000 Lux
• Smooth Falloff from Center to Edge
• Mini ProLock Mount
• Carrying Case for Fresnel and Barndoors

• For STORM 80c Monolight
• 11.8" Diameter Omnidirectional Soft Box
• Mini Bowens ProLock Mount
• Hook-and-Loop Skirt for Output Control
• Quick Setup
• Includes Carrying Bag

Main Features

• Formfitting Camera Cage
• 1/4"-20 & 3/8"-16 Accessory Threads
• Anti-Twist Three-Point Locking Design
• Threads to Mount Optional Accessories
• Arca-Type Quick Release Plate
• Durable Aluminium & Steel Construction
• Integrated Carbon Fibre

Main Features

• Provides Three Additional Shoe Mounts
• Connects via Shoe Mount or 1/4"-20 Mount
• Built-In Backstops for Secure Mounting
• Machined Aluminium-Alloy Construction
• Shoes Molded out of Same Piece
• Locking Pin

Main Features

• Formfitting Aluminum Full Camera Cage
• NATO Top Handle, HDMI Cable Clamp
• Left-Side Power Handle with Attachment
• 15mm LWS Baseplate with Aluminum Rods
• Run/Stop & HDMI Adapter Cables

Main Features

• Snaps Onto LWS 15mm Support Rods
• 3/8"-16 Threaded Support Rod
• 0.25" Horizontal Adjustment
• 0.875" Vertical Adjustment
• 1/4"-20 Mounting Adapter Included
• Y-Lens Adapter Included

Main Features

• Provides Three Additional Shoe Mounts
• Connects via Shoe Mount or 1/4"-20 Mount
• Built-In Backstops for Secure Mounting
• Machined Aluminium-Alloy Construction
• Shoes Molded out of Same Piece
• Locking Pin

Main Features

• Compatible with Tilta Dovetail Plate
• Aluminium and Stainless Steel
• Anti-Twist Top
• 15mm LWS Rod Clamps and 15mm Rod Pair
• Integrated Lens Support Adapter Bracket
• Dual ARRI-Compatible Rosettes

Main Features

• Formfitting Full Cage for Sony ZV1 Camera
• Allows Access to Battery & Memory Card Door When Attaching a Handle/Tripod
• Ergonomic Side Handle Provides a Comfort Grip
• Integrated Cold Shoe & 1/4"-20 Accessory Mounts
• Compatible with Cable Clamp 1693

Main Features

• Ergonomic design, comfortable grip experience
• Adjustable to different cage height and quick switch from left to right side
• Additional mounting options through cold shoe and strap eyelet
• Lightweight and portable design

Main Features

• For Sony Alpha a6300/a6400/a6500 Camera
• Compact, Formfitting Design
• 1/4"-20 & 3/8"-16 Threaded Holes
• ARRI Locating Holes