Tascam DR-60DmkII 4-Input / 4-Track Multitrack Field Recorder

Tascam DR-60DmkII 4-Input / 4-Track Multitrack Field Recorder

The DR-60D MKII is a compact 4-track audio recorder for dedicated use with a digital single-lens reflex (DSLR) or digital single-lens mirrorless (DSLM) camera as a video system. It can be mounted directly to the camera and offers various audio inputs and outputs to allow the recording of high-resolution audio material in parallel to, but separated from the camera and its video data.

The recorder features Tascam original HDDA microphone preamps which are known for high S/N ratio, low input-referred noise and low distortion. Recordings can be made at 44.1/48/96 kHz, 16/24-bit in WAV or BWF format. In addition to ordinary stereo recording, it is possible to record up to four channels simultaneously which can then be mixed down to a stereo signal. Recording levels can be adjusted independently for inputs 1, 2 and 3–4 and the Dual Recording function allows two files to be recorded in parallel at different levels.

The DR-60D MKII can output high-quality audio to a DSLR/DSLM camera to be recorded there as a reference track, and a camera input enables convenient monitoring of audio sent from a DSLR camera. Mid-side decoding, slate tone functions (automatic/manual), selectable time delay and other functions for convenient recording are also available.


Main Features

Changes since the previous model are marked red

Compact, high-quality audio recorder designed to be used in combination with a DSLR camera
Uses an SD/SDHC card as recording medium
High-quality recording inputs through Tascam original High Definition Discrete Architecture (HDDA) microphone preamps
In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible
Four channels can be mixed down to a stereo signal
Recording levels can be adjusted independently for inputs 1, 2 and 3–4
Dual recording function allows two files to be recorded simultaneously at different levels
Recording at 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
Broadcast Wave Format (BWF) supported as WAV recording format
New, smooth XLR/TRS combo jacks
XLR mic/line inputs can provide phantom power (+24V/+48V)
TRS mic/line inputs support +24 dBu input when used as line inputs
"HI+PLUS" setting allows a maximum input gain of 64 dB
Stereo mini jack input supports mics that require plug-in power, allowing the input of video mics and other high-output mics (+10 dBV maximum input level)
Low-cut filter conveniently reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz)
High-quality audio can be output to a DSLR camera for recording
Two camera outputs with different levels allow audio signal to be sent to a line or mic input of the camera
Camera input enables convenient monitoring of audio from a DSLR camera
Selectable mid-side decoding for use with MS microphone setups
Slate tone functions (automatic/manual) to simplify synchronization with video files when editing
Pre-recording function allows the unit to record the two seconds of sound before recording is activated
Auto recording function to start start and stop recording by input level
A new file can be created during recording (manually or by file size)
Self-timer function to start recording after a set period of time
Jump-back function allows the last several seconds of the currently played file to be replayed again by simply pressing a button
Selectable delay to eliminate time lags caused by differences in the distances of two input sources
QUICK button allows easy access to various functions
Divide function allows files to be split where desired
Mark function convenient for moving to specific locations
Equalizers for playback, and level alignment function to enhance the perceived overall sound pressure
File name format can be set to use a user-defined word or the date
Resume function to memorize the playback position before the unit is turned off
Line output and headphones output with individual level controls (3.5-mm jack)
128 x 64 pixel LC display with backlight
USB 2.0 port
Stand adapter (¼ inch) on bottom side to attach the unit to a tripod
DSLR bracket for easy camera attachment and removal with a coin
Dedicated remote control jack (for use with RC-10 and RC-3F (sold separately))
Hold switch to prevent accidental operation
Handles on the front left and right sides protect the screen and can be used to attach a shoulder belt
Operates on four AA batteries, an AC adaptor (sold separately: TASCAM PS-P515U), external battery pack (sold separately: TASCAM BP-6AA) or USB bus power
Power source switches automatically from external to internal when necessary (with pop-up message on display)

General

Recording media
SD card (64 MB 2 GB)
SDHC card (4GB to 32 GB)

Audio file compatibility WAV: 44.1/48/96 kHz, 16/24-bit

BWF (Broadcast Wave Format): 44.1/48/96kHz, 16/24-bit

Number of channels 4 channels (stereo x 2)

Analogue audio inputs and outputs

Mic/Line input 1/L, 2/R (switchable phantom power)
XLR-3-31
6.3-mm standard TRS Jack

Input switch set to MIC or MIC+PHANTOM

Input impedance 2 kOhm

Phantom Power
48 V 4 V (10 mA/channel) or
24 V 4 V (10 mA/channel)

Maximum input level 0 dBu

Minimum input level −72 dBu

Mic input gain (input level knob at maximum)
LOW: +11 dB
MID: +36 dB
HIGH: +52 dB
HIGH+PLUS: +64 dB

Input switch set to LINE

Input impedance 10 kOhm or higher

Nominal input level +4 dBu

Maximum input level +24 dBu

Mic/Line input 3-4 (supports plug-in power) 3.5-mm stereo mini jack

Input impedance 10 kOhm

Maximum input level +10 dBV

Minimum input level −50 dBV

Mic input gain (input level knob at maximum)
LOW: +3 dB
HIGH: +26 dB
HIGH+PLUS: +38 dB

CAMERA IN jack 3.5-mm stereo mini jack
Input impedance 10 kOhm
Nominal input level −10 dBV
Maximum input level +6 dBV
CAMERA OUT (LOW) jack 3.5-mm stereo mini jack
Output impedance 200 Ohm
Nominal output level −50 dBV
Maximum output level −30 dBV
Headphones output 3.5-mm stereo mini jack
Maximum output power 50 mW + 50 mW
CAMERA OUT (HIGH)/LINE OUT jack 3.5-mm stereo mini jack
Output impedance 200 Ohm
Nominal output level −10 dBV
Maximum output level +10 dBV

Other inputs and outputs
USB USB Mini-B Type
Format USB 2.0 HIGH SPEED mass storage class
REMOTE jack 2.5-mm TRS jack

Audio performance
Frequency response 20 Hz 20 kHz, +0.5/2 dB (LINE IN or MIC IN to LINE OUT, Fs 44.1/48 kHz, JEITA)
20 Hz 40 kHz, +0.5/3 dB (LINE IN or MIC IN to LINE OUT, Fs 96 kHz, JEITA)
Distortion 0.02% or less (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
S/N ratio 92 dB or more (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
Equivalent input noise 120 dBu or less
Note for JEITA Conforming to JEITA CP-2150

Computer compatibility
Windows Pentium 300 MHz or faster
128 MB or more memory
Macintosh Power PC, iMac, G3, G4 266 MHz or faster
64 MB or more memory
Recommended USB port USB 2.0
Recommended USB host controller Intel chipset
Supported operating systems
Windows XP, Windows Vista, Windows 7, Windows 8 (including Windows 8.1), Mac OS X 10.2 or later

Power supply and other specifications
Power supply
Four AA batteries (Alkaline or Ni-MH)
USB bus power supplied from a computer
AC adaptor (TASCAM PS-P515U, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)
Power consumption 5.4 W (maximum)
Dimensions (W H D) 133 mm 93 mm 78 mm (with the top adapter attached)
Weight 510 g (without batteries)
Operating temperature range 040 C