Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel
SKU: ATT448
Main Features
- Reduce Signals by 20, 30, or 40 dB
- In-Line 3-Pin XLR Female to Male
The Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload...
More Details
Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel
SKU: ATT448
Fast Shipping
Secure payment
Tax Included
Tax included.
Write a Review
Ask a Question
Main Features
- Reduce Signals by 20, 30, or 40 dB
- In-Line 3-Pin XLR Female to Male
The Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload...
More Details
-
Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel
The Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload the meters at the board and cause audio distortion.
The ATT-448 attenuator is placed in-line between the microphone and the board, and you can switch on the appropriate amount of attenuation. The choices are 20, 30, or 40 dB of signal reduction, for a wide range of uses on stage and in the studio.
The unit accepts 3-pin male and female XLR connectors.
Provides 20, 30, or 40 dB of microphone attenuationFor use with all low-impedance and phantom-powered condenser microphonesXLR input and outputMagnetically shielded case
Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel
The Hosa Technology ATT-448 In-Line Switchable Input Attenuator XLR Barrel is a switchable input attenuator for stepping-down an input level to a mixer when that level is too high. For instance, a hot microphone in front of a loud source will overload the meters at the board and cause audio distortion.
The ATT-448 attenuator is placed in-line between the microphone and the board, and you can switch on the appropriate amount of attenuation. The choices are 20, 30, or 40 dB of signal reduction, for a wide range of uses on stage and in the studio.
The unit accepts 3-pin male and female XLR connectors.
Provides 20, 30, or 40 dB of microphone attenuation
For use with all low-impedance and phantom-powered condenser microphones
XLR input and output
Magnetically shielded case