Teradek Serv Pro

Teradek Serv Pro

The Teradek Serv Pro is the foundation of Teradek's network-based video monitoring system. Connect the Serv Pro unit to your camera's SDI or HDMI port, and up to 10 iOS devices running the free VUER app can monitor the camera's video signal in resolutions up to 1080p with minimal 2-frame latency. The Serv Pro can achieve this through efficient H.264 compression schemes which maintain a high standard of video quality without requiring the massive bandwidth of uncompressed video solutions. Since the transmission is Wi-Fi based, the Serv Pro can be integrated into your local network for increased versatility. Multiple Serv Pro units can be linked over the same network for multi-camera monitoring functionalities. One iPad can monitor up to four simultaneous feeds at the same 1080p resolution and 2-frame latency as a single feed.

Inputs Video: 1 x BNC, SD/HD-SDI 1 x HDMI Type-A Audio: Embedded audio 1 x 3.5 mm, analog audio

Input Resolutions 1080p 23.98/24/25/29.97/30/50/59.94/60 1080PsF 23.98/24/25/29.97/30 1080i 50/59.94/60 720p 50/59.94/60 576p (HDMI only) 480p (HDMI only) NTSC PAL

Output Resolutions 1920 x 1080 1536 x 864 1280 x 720 960 x 540 480 x 270

Compression Video: H.264 (Baseline, Main, and High Profile) Audio: AAC-LC, MPEG Layer 2

Bit-Rate Max Bit-rate: 15 Mbps (wired), 10 Mbps (Wi-Fi) Supported Bit-rates: 750 kbps 1 Mbps 1.5 Mbps 2.5 Mbps 3 Mbps 4 Mbps 5 Mbps

Network Protocols TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP

Supported Video Transport Protocols Teradek Streaming Protocol (compatible with Teradek Apps, e.g. Live:Air, VUER)

Network Ethernet: 10/100/1000 Base-T Wireless: 2.4/5 GHz 802.11 a/b/g/n/ac MiMo

Power 1 x 2-pin LEMO input Consumption: 8 W (Wi-Fi on), 7 W (Wi-Fi off) Aux

Dimensions 4.75 x 3 x 1.1" / 12.1 x 7.6 x 2.8 cm

Weight 11.6 oz / 329 g