Videoguys Kit - Rode NTG-2 Shotgun PRO Camcorder Kit

Videoguys Kit - Rode NTG-2 Shotgun PRO Camcorder Kit

• The new RODE NTG-2 is a lightweight condenser shotgunmicrophone, which has been specifically designed for professional applications within the film, video, television and production industries.
  
  The NTG-2 provides a balanced low impedance output stage and operates either from an internal 1.5 V battery (AA) or48 V to the P48 standard.
  
  A wide bandwidth and controlled polar response coupled with low noise SMT electronics, makes the NTG-2 the perfect choice for film, video engineering and voice-over work. The NTG-2 is extremely lightweight making it ideal for mounting directlyto video cameras or on boom poles. The NTG-2 comes complete with mount and windshield.The windscreen effectively suppresses wind noise when recording outdoors in moderate conditions.
  
  Features
  
  • Broadcast sound quality.
  
  • Rugged metal construction.
  
  • Condenser microphone transducer.
  
  • Weighing 161 grams approx. (5.17 oz.).
  
  • Low noise circuitry.
  
  • Low handling noise
  
  .• Supplied with stand mount and zip pouch.
  
  • Designed & manufactured in Australia
  
  .• Full 2 year guarantee.
  
  OperationPower
  
  The NTG-2 is designed to operate from standard P48phantom power or a 1.5 V Alkaline Battery. The NTG-2will operate between 44 V to 52 V applied with positivepolarity to pin 2 and pin 3 via the output XLR connector.
  
  Output Impedance
  
  The NTG-2 will operate satisfactorily into a load impedanceas low as 1 k§Ù. If a load below this is used, the outputsignal level will be reduced.The NTG-2’s output is balanced between pin 2 (hot) andpin 3 (cold). Pin 1 is ground.

• 
  

  A shotgun microphone suspension shock mount for high end video cameras. The SM5 shock mount is designed specifically to fit Panasonic® and Sony® video cameras with clamp mounts.
  
  Features a 4-way rubber suspension with an integral Ø24 mm and Ø27 mm clamp mount adaptor.
  The SM5 incorporates a two way mounting system with 1/4"x 20 and 3/8" x 16 internal threads, for Tripod and Boom Pole mounting.

  
  

  
  

• Eliminates for High wind noise, suits Rode : VideoMic, NTG-1 & NTG-2.

• 
  Specifications
  Acoustic principle: Line plus Gradient.
  Directional pattern: Super-Cardioid.
  Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
  Output impedance: 250 Ω - phantom power, 350 Ω - battery power
  Signal/Noise ratio DIN/IEC 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
  Equivalent noise: 18 dB SPL (per IEC651, IEC268-15)
  Maximum SPL: 131 dB (@ 1% THD into 1 kΩ)
  Sensitivity at 1 kHz into 1 kΩ: -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit) Dynamic range - Amplifier DIN/IEC 651 113 dB (per IEC651, IEC268-15) Power (Supply voltage): 1.5 V Alkaline Battery or P48 Phantom
  Current consumption: 2.0 mA Battery Life: >400 hours with fresh alkaline battery.
  Output Connection: 3 pin XLR, balanced output between pin 2(+), 3(-) and Pin 1 (ground)
  Weight approx.: 161 g approx. (5 oz.)
  Dimensions: 278mm(L)x22mm(W)