Products

Main Features

• 100% carbon fibre construction
• Lightweight - only 535gm (1.2lb) fully extended
• Extends from 810mm (2'8") to 3m (10').

Main Features

• Charging Case For Wireless GO (Gen 3)
• Simultaneous Charging Of Transmitters And Receiver
• Two Full Recharges For 21 Hours
• Access To Units For Transfers And Settings
• Accommodates Two Transmitters And A Receiver

Main Features

• For Wireless GO II Microphone System
• Fits Transmitters and Receiver
• Integrated Battery: 2 Additional Full Charges
• Provides Two Recharges for Up to 21 Hours Use
• Rugged Enclosure and Zip System
• Charges & Protects for Storage/Transport

Main Features

• 4 x Coloured Windshields
• 4 x Coloured 3.5mm mini-jack rings
• 4 x Coloured tags for Wireless GO Transmitters
• 1 x Set of coloured stickers

Main Features

• For up to 4 NT-USB Mini Microphones
• 4 x Colour-Coded Mic Caps
• 4 x Colour-Coded USB Type-A Cable Clips
• 8 x Colour-Coded USB Type-C Cable Clips
• Pink, Green, Blue, and Orange
• Colours Match Channels in Rode Connect

Main Features

• Set of Four Different Colours (Pink, Green, Blue and Orange)
• Includes coloured windshields, cable identification rings
• Includes tags and a sticker sheet
• Compatible with the Wireless GO, Lav GO & smartLav+

Main Features

• Neat Mounting of Two Microphones or Cold Shoe Accessories
• Pairs Perfectly with the SC11
• A Simple Solution for Streamlining their Setup
• Includes Cable Management Slots for Select RODE Audio Cables

Main Features

• High-Performance Windshield for the RODE VideoMic GO
• Acoustically Transparent Synthetic Fur
• Minimises Wind Noise

Main Features

• Deluxe furry wind cover for the VideoMic Pro+
• Designed to reduce wind noise when recording outdoors

Main Features

• High-Performance Windshield for the RODE VideoMic Pro
• Acoustically Transparent Synthetic Fur
• Minimizes Wind-Noise

Main Features

• High-performance windshield
• Acoustically transparent synthetic fur
• Suits VideoMic, NTG-1 & NTG-2

Main Features

• High-performance windshield for the RODE stereo microphones
• Compatible with the NT4 and Stereo VideoMic Pro
• Acoustically transparent synthetic fur

Main Features

• High-performance wind cover for the RODE Blimp
• For use in high-wind conditions
• Acoustically transparent synthetic fur

Main Features

• Desktop Microphone Stand
• Ideal for Radio, Broadcast, Studio and Home use
• Height Adjustment from 260mm to 405mm

Main Features

• Two Pivot Points for Positioning
• Heavy Base to Balance Microphone
• No Need for Clamps or Mounting
• Extends 38cm Vertically
• Supports up to 900g
• Cable Management Guides for Neat Setup
• Includes 3/8" to 1/4" Thread Adapter

Main Features

• Set of three clips
• MagClip GO for easy mounting of the transmitter
• CrossClip allows the transmitter to be discreetly mounted

• High-quality 1080p60 HDMI to USB-C Converter
• Seamlessly connects your DSLR or mirrorless camera to a computer or other UVC-compatible device, enabling it to function as a high-quality webcam
• Durable anodised aluminium body
• Super compact, ultra-lightweight form factor with plug-and-play operation for ease of use

Main Features

• HDMI Type A to Type A Male
• Up to 8K at 60 Hz or 4K at 120 Hz
• Up to 48 Gb/s Data Transfer Rate
• Zinc, Fiber-Optic & PVC Construction

Main Features

• 4 x 3.5mm to 1/4" Headphone Adapters
• Use Consumer Headphones with Pro Gear
• For RODECaster Pro
• For AI-1

Main Features

• Pink, Large
• Lightweight and low-profile headset microphone
• Ultra-low-noise omnidirectional condenser capsule
• Gold-plated 3.5mm TRS output with removable locking connector
• 1.2m (4') Kevlar-reinforced shielded cable
• Includes mini-furry and pop filter

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG and Interviews
• Fits All Series IV Clip-On Transmitters
• For Wireless GO (Gen 3), Wireless GO II
• For Wireless GO, Wireless PRO
• For Wireless ME

Main Features

• Ideal for Broadcast and Content Creation
• Pair Seamlessly with Series IV Receivers
• Omnidirectional Condenser Capsule
• 2.4 GHz Transmission
• 200m Line-of-Sight Range
• 32-Bit Float / 48 kHz Recording Built In
• Intelligent GainAssist Technology
• Low Handling Noise
• Rechargeable Battery, Up to 30-Hour Use
• Includes Pop Filter, USB Cable, Mic Clip

Main Features

• Discreet mounting system for lavalier microphones
• Two mounting points and a cable management slot
• Made from medical-grade, skin-safe material
• 10 Pack

Main Features

• Discreet mounting system for lavalier microphones
• Two mounting points and a cable management slot
• Made from medical-grade, skin-safe material
• 3 Pack

Main Features

• Premium large-diaphgram valve condenser microphone
• 1-inch gold-sputtered capsule
• Continuously vairbale polar pattern
• Hand-selected twin-triode 6922 valve
• Ultra-low noise
• Wide dynamic range

Main Features

• Ergonomic and discreet lavalier mounting clip
• Supplied in pack of three
• Secures Rode Lavalier Microphones

Main Features

• For Mobile Journalist, Videographer
• Clip-On Mic for Rode Wireless GO Systems
• Gold-Plated 3.5mm TRS Connector
• Durable Kevlar-Reinforced Cable
• Easy to Conceal
• Omni Polar Pattern for 360-Degree Pickup
• Wide 20 Hz to 20 kHz Frequency Response
• Pop Shield Reduces Vocal Plosives
• Mic Clip with Cable Management
• Compatible with Many Transmitters

Main Features

• Professional-grade lavalier mic with 3.5mm TRS jack
• High-quality omnidirectional condenser capsule
• Discreet 4.5mm miniature microphone
• Kevlar reinforced cable
• Includes pop shield and durable mounting clip

Main Features

• Premium lavalier microphone with a unique low-profile design
• Compact mounting clip
• Omnidirectional polar pattern
• Delivers broadcast-grade audio with a flat frequency response
• 3.5mm TRS locking connector
• Includes pop filter, mini furry windshield, mic clip, set of coloured ID rings and zip case

Main Features

• Ergonomic headset mount for RODE lavalier microphones
• Engineered from highly durable spring steel
• Integrated cable management
• Available in Junior, Medium or Large sizes

Main Features

• Ergonomic headset mount for RODE lavalier microphones
• Engineered from highly durable spring steel
• Integrated cable management
• Available in Junior, Medium or Large sizes

Main Features

• Ergonomic headset mount for RODE lavalier microphones
• Engineered from highly durable spring steel
• Integrated cable management
• Available in Junior, Medium or Large sizes

Main Features

• Rechargeable Lithium-ion battery
• Compatible with VideoMic Pro+ and Performer Kit
• Long life and quick recharge
• 1600mAh

Main Features

• Extends Rode Blimp System
• For Use with RODE NTG8 Shotgun Mic
• Fits Shotgun Mic Barrels up to 23.6"
• Includes DeadWombat Windshield
• Molded Plastic Construction

Main Features

• Cardioid Polar Pattern
• High-Output Neodymium Dynamic Capsule
• 75 Hz to 18 kHz Frequency Response
• Low Handling Noise

Main Features

• Cardioid Polar Pattern
• High-Output Neodymium Dynamic Capsule
• 75 Hz to 18 kHz Frequency Response
• Low Handling Noise
• Integrated on/off switch with locking screw

Main Features

• Live performance condenser microphone for vocals
• High-quality 1/2-inch condenser capsule
• Tight supercardioid polar pattern
• Robust, all-metal body
• Integrated on/off switch with locking screw
• 10-year warranty

Main Features

• Versatile end-address condenser microphone
• Cardioid polar pattern
• Robust, all-metal body
• Selectable pad (-10dB, -20dB) and high-pass filter (80Hz)
• 10-year warranty

Main Features

• Matched of pair small-diaphragm cardioid condenser microphones
• 1/2-inch gold-sputtered capsules
• Carefully selected pair with no more than 1dB sensitivity variation
• Very low noise and full frequency response
• Includes microphone clips and windshields
• 10-year warranty

Main Features

• Clips Wireless GO Transmitter to Clothes
• Magnet Clip Keeps Clothes in Place
• Provides Complete Flexibility