Audio-Technica AT2035 Cardioid Condenser Mic + AT8700 Boom Arm Bundle

Audio-Technica AT2035 Cardioid Condenser Mic + AT8700 Boom Arm Bundle

•  
  Audio-Technica AT2035 Cardioid Condenser Microphone

  The Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that's affordable for home-based musicians, vocalists, and podcasters while balancing value and good audio performance. When tracking in untreated rooms, the large-diaphragm condenser capsule's cardioid polar pattern minimises feedback and off-axis noise, which is a desirable feature. Moreover, the included bespoke shockmount reduces unnecessary handling and foot noise.

  To enhance headroom and capture extremely loud sources up to 158 dB SPL without distortion, turn on the -10 dB pad. Turn on the 80 Hz high-pass filter switch to reduce the lows without using EQ when low-frequency rumble/hum or overpowering bass invade your signal. The AT2035 is a solid-state condenser with an XLR output, therefore it needs to be connected to a mic preamp with an XLR that can provide 48V phantom power, which is equivalent to anything between 11 and 52 VDC.

   

  At Home or Onstage

  This side-address cardioid condenser offers detailed sound and minimal noise, and it is intended for essential home/project studio applications as well as live performance. The AT2035 is perfect for artists, streamers, podcasters, and other content producers because of its natural, smooth sound.

  Selectable Settings

  The AT2035 comfortably manages high sound pressure levels (up to 158 dB) and prevents the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation, and mechanically related vibrations. It is equipped with a switchable 80 Hz high-pass filter and -10 dB pad.

  Ready for Daily Use

  In addition to its tough design and high-performance features, the AT2035 offers consistent performance across models. A customised shockmount and protective pouch are included.

  Features at a Glance

  • Large diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide unmatched versatility
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
  • Switchable 80 Hz high-pass filter and -10 dB pad
  • Custom shockmount provides superior decoupling from vibrations
  • Operates on 11 to 52 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preamps
  • Balanced XLR 3-pin output connector
•  
  Audio-Technica AT8700 Adjustable Microphone Boom Arm

  Content creators can mount their favorite microphone on the Audio-Technica AT8700, a sturdy and fully adjustable boom arm that clamps to the edge of your table, freeing up space on your desktop. With full 360° rotation that facilitates any mic position, use the arm to place your mic where you want it, and keep it firmly in place while you stream games, podcasts, records, and more. The AT8700 comes with six USB cable clips and six XLR cable clips to reduce clutter and a table clamp.

  Features

  • Table-mount microphone boom arm with 5/8"-27 thread
  • Full 360° rotation
  • Includes USB cable clips (6), XLR cable clips (6), and table C-clamp

•  
  Audio-Technica AT2035 Cardioid Condenser Microphone

  Primary Applications

  Live Sound, Studio Recording

  Form Factor

  Large Diaphragm Mic/Stand/Boom Mount

  Intended Sound Sources

  Vocals, Speech/Voice Over, Instrument

  Sound Field

  Mono

  Operating Principle

  Pressure Gradient

  Capsule

  Electret Condenser

  Polar Pattern

  Cardioid

  Orientation

  Side Address

  Circuitry

  Solid-State

  Pad

  -10 dB

  High-Pass Filter

  80 Hz, 12 dB/Octave

  On-Board Controls

  High-Pass Filter, Pad

  Frequency Range

  20 Hz to 20 kHz

  Maximum SPL

  148 dB SPL (1 kHz, 1% THD)
  158 dB SPL (1 kHz, 1% THD, with Pad)

  Impedance

  120 Ohms

  Sensitivity

  -33 dBV/Pa

  Dynamic Range

  136 dB (1 kHz, at Max SPL)

  Signal-to-Noise Ratio

  82 dB (1 kHz)

  Equivalent Noise Level

  12 dB SPL A-Weighted

  Output Connectors (Analog)

  1 x XLR 3-Pin Male (on Mic)

  Headphone Connector

  NONE

  Operating Voltage

  11 to 52 V (Phantom Power)

  Operating Current Consumption

  3.8 mA

  Colour

  Black

  Mounting

  Shockmount (Included)

  Included Case

  Pouch

   

•  
  Audio-Technica AT8700 Adjustable Microphone Boom Arm

  Form Factor Studio Microphone Arm with Mount

  Color Black

  Thread Size 5/8"-27

  Rotation Range 360°

  Cable Management External Cable Clip

  Mounting Type C-Clamp (Included)