Audio-Technica AT2035 Cardioid Condenser Microphone

Audio-Technica AT2035 Cardioid Condenser Microphone

The Audio-Technica AT2035 condenser microphone offers a smooth and detailed sound at a price point that's affordable for home-based musicians, vocalists, and podcasters while balancing value and good audio performance. When tracking in untreated rooms, the large-diaphragm condenser capsule's cardioid polar pattern minimises feedback and off-axis noise, which is a desirable feature. Moreover, the included bespoke shockmount reduces unnecessary handling and foot noise.

To enhance headroom and capture extremely loud sources up to 158 dB SPL without distortion, turn on the -10 dB pad. Turn on the 80 Hz high-pass filter switch to reduce the lows without using EQ when low-frequency rumble/hum or overpowering bass invade your signal. The AT2035 is a solid-state condenser with an XLR output, therefore it needs to be connected to a mic preamp with an XLR that can provide 48V phantom power, which is equivalent to anything between 11 and 52 VDC.

At Home or Onstage

This side-address cardioid condenser offers detailed sound and minimal noise, and it is intended for essential home/project studio applications as well as live performance. The AT2035 is perfect for artists, streamers, podcasters, and other content producers because of its natural, smooth sound.

Selectable Settings

The AT2035 comfortably manages high sound pressure levels (up to 158 dB) and prevents the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation, and mechanically related vibrations. It is equipped with a switchable 80 Hz high-pass filter and -10 dB pad.

Ready for Daily Use

In addition to its tough design and high-performance features, the AT2035 offers consistent performance across models. A customised shockmount and protective pouch are included.

Features at a Glance

• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
• Switchable 80 Hz high-pass filter and -10 dB pad
• Custom shockmount provides superior decoupling from vibrations
• Operates on 11 to 52 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preamps
• Balanced XLR 3-pin output connector

Primary Applications

Live Sound, Studio Recording

Form Factor

Large Diaphragm Mic/Stand/Boom Mount

Intended Sound Sources

Vocals, Speech/Voice Over, Instrument

Sound Field

Mono

Operating Principle

Pressure Gradient

Capsule

Electret Condenser

Polar Pattern

Cardioid

Orientation

Side Address

Circuitry

Solid-State

Pad

-10 dB

High-Pass Filter

80 Hz, 12 dB/Octave

On-Board Controls

High-Pass Filter, Pad

Frequency Range

20 Hz to 20 kHz

Maximum SPL

148 dB SPL (1 kHz, 1% THD)
158 dB SPL (1 kHz, 1% THD, with Pad)

Impedance

120 Ohms

Sensitivity

-33 dBV/Pa

Dynamic Range

136 dB (1 kHz, at Max SPL)

Signal-to-Noise Ratio

82 dB (1 kHz)

Equivalent Noise Level

12 dB SPL A-Weighted

Output Connectors (Analog)

1 x XLR 3-Pin Male (on Mic)

Headphone Connector

NONE

Operating Voltage

11 to 52 V (Phantom Power)

Operating Current Consumption

3.8 mA

Colour

Black

Mounting

Shockmount (Included)

Included Case

Pouch