Mains/Batteries & Accessories

Main Features

• Standard V mount fits most V mount batteries.
• Dual D-Tap output ports and DC output ports.
• On/off switch for easy use.
• Dual rod clamp suits 15mm rail support system.
• Multiple built-in 1/4?-20 thread holes for accessory attachment.

Main Features

• For EN-EL18d Battery
• Charge Status Indicator Lights

Main Features

• Acts as a V-Lock Battery
• D-Tap Output
• LED Indicator

Main Features

• For Endura Batteries with D-Tap Advanced
• Single-Channel D-Tap Advanced Charger
• 3-Pin Safe Charge Design
• Charger Monitors Cell Status

Main Features

• Provides 15 Volts DC power to the Camera
• Portable Quad simultaneous charger
• Designed to recharge up to 4 V-mount Lithium-ion batteries
• CE approved

Main Features

• Portable dual simultaneous charger
• CE [European Certification] approved
• Designed to recharge V type Li-ion batteries
• Standard Mount: Install with V-Mount connection
• Provides 15V DC power for video cameras

Main Features

• Requires DR-E6 or DR-E18 DC Coupler
• For Select Canon Cameras
• Enables Long-Term Continuous Shooting

• Extension Cable
• Provides More Distance from Controller

• For IDX Imicro-50, 98, and 150 Batteries
• 154W Maximum Dual V-Mount Plate
• 1 x 45W USB-C PD Output
• 1 x 80W D-Tap Output, Unregulated
• Sequential Charging and Discharging
• Works with IDX V-Mount Charger

Main Features

• Replacement Power Supply
• Spare Part

Main Features

• Charge up to 2 x B-Mount Batteries
• 4-Pin XLR 16.5 VDC, 3A Power Output
• Independent Charging/Power Adapter Modes
• Red/Yellow/Green Charging Status LEDs
• Integrated Carry Handle for Portability

• For Mounting V-Mount Batteries
• Attaches Directly to Camera
• No Additional Cabling Required
• Suits URSA Cine Cameras Only

Main Features

• Complete power supply solution for NP-F batteries, lightweight, compact, and easy to store.
• Back-mounted design balances the center of gravity of the lens and saves energy for handheld shooting.
• Rotatable design for easy access to LCD screen and viewfinder.
• Dual Arca-Swiss design, to cater to more scenarios.
• Built-in dual DC output interface, convenient for multiple equipment power supply.

Main Features

• Fits Sony L-Series/Canon LP-E6 Batteries
• Powers Ace 500 Transmitter or Receiver
• 5.5mm x 2.1mm DC Barrel Connector

Main Features

• 1.8 Metres Long
• Earthed
• SAA Approved

Main Features

• 530g
• Parallel
• 16.8V 5A

Main Features

• Built-in AC Adapter 80W DC
• Charges 4 V Mount Batteries Simultaneously
• 16.5V, 5A 4-pin XLR power output
• Green/yellow/red status indicator
• Built-in fan

Main Features

• Power DJI High-Bright Remote Monitor
• V-Mount Battery Plate
• Secure Mounting with Release Pins
• 1/4"-20 Mounting Screws
• Aluminium & Silicone Construction

Main Features

• Power Camera from Pro Battery Plate
• 36cm to 100cm Coiled Cable
• 2.1mm Male Barrel Connector
• Fully Decoded Dummy Battery
• Regulated 7.4 to 8.4V Output

Main Features

• Clamps on Lightstand
• D-Tap Output Port
• D-Tap to 3-Pin XLR Cable Included

Main Features

• For Blackmagic Pocket Cinema Camera 4K/6K/6K Pro
• 2.1mm Male DC Barrel Connector
• Right-Angle DC Plug
• 2-Pin Camera Power Connector
• Cable Length: 40cm

Main Features

• Dual Charger for BP-955/BP-975 Batteries
• Micro-USB and USB Type-C Power Inputs
• USB Type-A Output for Mobile Devices
• Bright LCD Screen

Main Features

• For Nikon EN-EL15, EN-EL15a, EN-EL15b and EN-EL15c Batteries
• Wall Charger

Main Features

• External DC Coupler for EOS R5 C
• Allows Mains or Battery Power to Camera
• Allows Camera to Capture up to 8K RAW
• Provides 9V/3A Minimum Voltage to Camera

Main Features

• Optional AC Adapter
• Requires EP-5B Power Connector
• Provides Power to Select Nikon Cameras

Main Features

• 4 Sequential and 2 Simultaneous Charging
• Up to 2.7A Quick-Charge Current
• Fanless Design, Overvoltage Protection
• Support Stand

Main Features

• 12V Dual Battery Charger
• For AG-VBR118G, AG-VBR89G, AG-VBR59
• Also Supports VBD58, VBD55, D54, VBD29
• 36W Power Consumption

Main Features

• 2 x V-Mount Plates
• 4-Pin XLR Connections

Main Features

• Compatible with Sony L Series, Panasonic, & Canon BP/LP 7.4V batteries
• 10 Interchangeable plates
• Simultaneously quick charges two batteries
• Universal AC input for worldwide use
• Auto power-down if inactive for 1hr
• Charger status LED indicators
• Light-weight and portable
• Charging will automatically stop when the battery is fully charged

Main Features

• Fits Select Canon DC Couplers
• Power Camera for Extended Period of Time
• World Wide Use 100-240V 50/60Hz AC

Main Features

• Power Canon C70/C80 with External Battery
• D-Tap Connector on One End
• Right-Angle DC Barrel Connector
• Regulated Cable for Camera Voltage
• Cable Measures 50cm in Length

• Hot-Swap UPS Function: Accommodates two NP-F series batteries for uninterrupted power via hot-swapping.
• Multiple Power Outputs: Features D-Tap, DC 5521, and USB-C ports to power multiple devices simultaneously.
• Intelligent Power Management: Optimizes battery usage with smart discharge / charge modes and clear status indicators.
• Independent Power Control: Single press to check status and enable output; long press (2s) to disable all connected devices.
• Versatile Mounting Options: Mounts via a V-mount plate, 15mm dual rod clamp, or the bottom 1/4"-20 threaded holes.

Main Features

• Mini Universal V-Mount Battery Plate
• 15mm LWS Rod Clamp
• 14.8V D-Tap & 2-Pin LEMO-Type Outputs
• 60W USB-C PD Output
• Aluminium & Stainless Steel Construction

• Hot-Swap UPS Function: Accommodates two NP-F series batteries for uninterrupted power via hot-swapping.
• Multiple Power Outputs: Features D-Tap, DC 5521, and USB-C ports to power multiple devices simultaneously.
• Intelligent Power Management: Optimises battery usage with smart discharge/charge modes and clear status indicators.
• Independent Power Control: Single press to check status and enable output; long press (2s) to disable all connected devices.
• Versatile Mounting Options: Mounts via a V-mount plate or the bottom 1/4"-20 threaded holes.

• 3A Charge Current
• Charge Two 98Wh Batteries in 2.5 Hours
• Recessed Carry Handle
• Aluminum Construction

• Attaches to Rear of FX6 Camera
• Supports V-Mount Battery
• Access to BP-U Battery Allows Hot Swaps
• 3 x D-Tap Ports, Protective Digital Fuse

Main Features

• For ENDURA V-mount Batteries
• Quick & Safe Charging
• LED Charging Mode Indicator
• Ultra-slim, Rugged Construction
• Portable Design

Main Features

• Compatible with RED KOMODO Cinema Camera
• Coiled, Braided Power Cable
• D-Tap Male to 2-Pin LEMO-Type Female
• Power KOMODO with D-Tap Source

Main Features

• Converts Roland PSB-7U to Allow you to Power Older Roland Devices including Keyboards

Main Features

• Flexible Charging: USB-C PD3.1+ USB-A QC4.0
• Compact Design: Small size (35 x 37 x 34mm) for portability.
• Fireproof Material: Made with fireproof PC for safety.
• Certified and Reliable: USB-IF, CE, FCC, RoHS, and more certifications.

Main Features

• Charge Select Li-Ion Batteries from USB
• Output Range: 7.2 to 8.4V, 700mA
• Includes 11 Battery Plates
• Illuminated LCD Status Screen
• Micro-USB Input Port
• Compact Portable Design

Main Features

• Adapts V-Mount Camera to Gold Mount
• For Micro & Full-Size Batteries
• 2 x D-Tap Output Ports
• 5.8A E-Fuse with Reset Button
• Camera Stays Running If Voltage Exceeded
• Durable Anodized Aluminum Build

Main Features

• 1 Metre Long
• Earthed
• SAA Approved