AJA FS1-X Frame Synchronizer & Converter with MADI Audio

AJA FS1-X Frame Synchronizer & Converter with MADI Audio

AJA FS1-X Frame Synchronizer & Converter with MADI Audio

The AJA FS1-X Frame Synchronizer & Converter with MADI Audio features a comprehensive array of video and audio inputs/outputs for converting between a wide range of analog and digital signals. It comes in a rugged, 1RU chassis ideal for high-density application and packed machine rooms.

Connections consist of 16-channel AES audio, 8-channel analog audio, 64-channel MADI audio over coax or fiber, GPI and LAN control, optional SDI fiber, 3G-SDI, HDMI, Component, Composite, and Reference with Loop-Through, supporting all broadcast video formats. The front panel features illuminating menu selection buttons, an alphanumeric LCD with status and control information, parameter select and adjust buttons, and activity LEDs displaying settings and conditions.

The FS1-X supports redundant power supplies and includes two AC power cords. It is quickly configurable by any computer on the network via a standard web browser, and it can be stacked vertically without limit as long as there's adequate supply of cool air around its vents.

Video Input/Output Formats

SDI and Fiber - The FS1-X has two standard SDI video inputs and outputs, and two optional Fiber video inputs and outputs.

 All SDI video inputs and outputs, including Fiber, are YCbCr 4:2:2 pixel format.

 Fiber connections support 3G-SDI, SMPTE-259/292/296, 8- or 10-bits (optional)

- Single-channel LC connector modules

- Single-channel SC connector modules

- Dual-channel LC connector modules

 2.97 Gb 3G-SDI Level B (SMPTE 425-B / SMPTE 372)

• 2K 1080p 50

• 1080p 50 (SMPTE 274)

 3G-SDI Level B 2.967 (2.97/1.001) Gb (SMPTE 425-B / SMPTE 372)

• 2K 1080p 59.94

• 1080p 59.94 (SMPTE 274)

 3G-SDI Level A 2.97 Gb (SMPTE 425-A)

• 2K 1080p 50

• 1080p 50 (SMPTE 274)

 3G-SDI Level A 2.967 (2.97/1.001) Gb (SMPTE 425-A)

• 2K 1080p 59.94

• 1080p 59.94 (SMPTE 274)

 Dual-link HD-SDI, 2x 1.485Gb (SMPTE 372)

• 2K 1080p 50

• 1080p 50

 Dual-link HD-SDI, 2x 1.4835Gb (SMPTE 372)

• 2K 1080p 59.94

• 1080p 59.94

 HD-SDI, 1.4835 Gb (SMPTE 292)

• 2K 1080p 23.98, 29.97

• 1080p 23.98, 29.97

• 1080PsF 23.98, 29.97

• 1080i 59.94

• 720p 59.94

 SD-SDI, 270Mb (SMPTE 259-C)

• 625i 50

• 525i 59.94

HDMI - The HDMI input only accepts SMPTE video formats, and accepts embedded audio. Video input formats are RGB or YCbCr 4:2:2 pixel format for consumer video scan formats. Computer scan rates are not supported.

• 1080p 23.98, 24, 25, 29.97, 50, 59.94

• 1080i 50, 59.94

• 720p 50, 59.94

• 625p 50 • 625i 50

• 525p 59.94

• 525i 59.94

Component HD/SD Analog - The Component Analog Input accepts YCbCr 4:2:2 pixel format, configurable to SMPTE or Betacam levels. If the composite input is used, the component input is not available.

• 1080p 23.98, 24, 25, 29.97

• 1080PsF 23.98, 24, 25, 29.97

• 1080i 59.94

• 720p 50, 59.94

• 625i 50

• 525i 59.94

Composite SD Analog - The FS1-X composite analog video input/output formats are listed below. If the component inputs are used, the composite input is not available.

• 625i 50

• 525i 59.94 (switchable to NTSC 7.5 IRE or 0 IRE setup)

Reference

• 1080p 50 tri-level sync

• 1080i 50, 59.94 tri-level sync

• 720p 50, 59.94 tri-level sync

• 525i 59.94, 625i 50 analog composite

• Genlock available to the current Video Processor 1 Input

• Free run

Formal Exceptions

• The following formats are not supported:

• 720p 23.98, 24, 25, 29.97

• All 30, 60 frame rates

• 4:4:4 YCbCr, RGB, or XYZ inputs

• 4:2:2 YCbCr 12-bit inputs

Video Format Alarms - When incompatible I/O formats are detected, an alarm can be triggered with these results:

• Lights the relevant alarm LED on the front panel (FMT ERROR, 1 or 2)

• Displays an alarm in the browser user interface

• Influences selection of the first-displayed status screen

• Generates an SNMP trap (if configured)

• Triggers a GPI Output (if configured)

Video A/D, D/A Converters

• 12-bits

• 2 x oversampled (HD)

• 4 x oversampled (SD)

Audio Inputs/Outputs - The FS1-X can accept and route any audio inputs to any audio output.

• 8-Channel balanced analog I/O, DB-25F 25-pin connector (Tascam pinout)

• 16-Channel AES/EBU I/O (BNC), DB-25F 25-pin connector

• 16-Channel SDI/HD-SDI embedded BNC (2)

• 16-Channel SDI/HD-SDI embedded Fiber (2)

• 64-Channels MADI digital audio. BNC

• 64-Channels MADI digital audio. Fiber

Audio Analog Levels - Analog audio input and output levels, as referenced to full scale digital, can be set to:

• +12dBu (consumer), +15dBu, +18dBu, +24dBu (professional)

Audio Adjustments - Individual audio channels (or channel pairs) can adjusted for:

• Level: +/- 18 dB

• Phase: Normal or Reverse

• Delay: -128 to +12288 samples (-2.7 ms to +256 ms)

LAN Interfaces

• 10/100/1000 automatic configuration

• Automatic cable crossover (auto MDI-X)

• Embedded web server

• SNMP

GPI Interace

• DB-15F: Single connector provides four inputs and four outputs. See Appendix B for a connector pinout and GPI specifications

Size (w x d x h)

• 19" x 16" x 1.75" (1RU) (482.6mm x 405.5mm x 44.4mm)

Weight

• 7.9 lbs (3.6 kg)

Power

• 100-240 VAC 50/60 Hz, (Dual, redundant power supplies), 55W typical, 60W with FRC option; 70W max.

Environment

• Cooled via two internal fans and side vents

• Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)

• Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)

• Operating Relative Humidity: 10-90% noncondensing

• Operating Altitude: <3,000 meters (<10,000 feet)