Gimbal Stabiliser Accessories

Main Features

• For Select DJI RS-Series Models
• NATO Rail with Locating Pin
• Multiple 1/4"-20 Threaded Holes
• ARRI-Type 3/8"-16 Location Holes
• Curved Grip with Anti-Slip Silicone
• Adjusts to 180-Degree Angle
• 6kg Payload Capacity

Main Features

• Designed for DJI RS 2/RSC 2 stabilizer.
• Plentiful mounting options for attaching a monitor, action camera and sound receiver, etc.
• Monitor can be adjustable with a tilt angle about 165?, and can be stopped at any angle without tools.
• Build-in 1/4?-20 threaded holes, dual cold shoe.
• Clamps to each side of RS 2&RSC 2 via quick-release NATO clamp with anti-removal stud.
• Matte surface perfectly matches with the industrial design of stabilizer.

Main Features

• Designed for DJI RS 2.
• Locks camera via one 1/4"-20 and one 3/8"-16 screw to prevent twists.
• Features one 1/4"-20 threaded hole on the rear bottom for adding counterweight.
• Works with SmallRig Counterweight Kit 3125, Focus Motor Component 2851 and Lens Support 2850.

Main Features

• Quick release design for swift and efficient operation.
• The monitor support features a 165-degree tilt. Use the thumbscrew to securely lock the mount at the desired angle.
• Supports mounting monitors, action cameras, microphones, and other devices on both sides of the stabilizer.
• The 1/4"-20 screw for attaching the monitor features anti-rotation pins to prevent loosening of the monitor.

Main Features

• For Select RS Gimbal Stabilizers
• Top Replacement Plate
• 1 x D-Ring 1/4"-20 Camera Screws
• Adjustable Placement Guide

Main Features

• Fits DJI RS 2/RSC 2 Handheld Gimbal
• Add Comfort & Stability, Reduce Fatigue
• 1/4"-20 & 3/8"-16 Accessory Threads
• NATO Rails & Shoe Mounts
• NATO Clamps Install on Gimbal Handle
• Two-Handed Operation, Inverted Mode
• Locking Levers for Easy Adjustment
• Disassembles for Storage/Transport
• Comfortable Silicone Grips
• Durable Aluminum Construction

Main Features

• Focus Motor for Select RS Gimbals
• 30% Speed Increase, Low Latency
• 524.9' Transmission Distance
• 15mm Rod Mount Configuration

Main Features

• Ergonomic Vest Supports up to 10kg Rig
• For Most Single or Dual-Handle Gimbals
• Quick-Release Buckle with Safety Button
• Fits 33.5-51.2" Waist Sizes
• NATO Rail Vertical Gimbal Adjustment
• Ball Head 1.35-1.46" Tripod Holder
• Ball Head RS 2/3 Battery Grip Holder
• Padded Nylon, Aluminum & Steel
• Multiple 1/4"-20 Threads & Shoe Mounts
• Elastic Tripod Loop

Main Features

• For RS 3 Mini Gimbal
• Mounts Camera on Gimbal
• 1/4"-20 D-Ring Camera Screw
• Upper Quick Release Plate

Main Features

• Connects with a Sony camera
• For Camera Control Port of DJI RS 2/DJI RSC 2 for camera control
• Compatibility: DJI RS 2, DJI RSC 2

Main Features

• Designed for DJI RS 2/RSC 2 gimbal.
• Attach L-bracket and cage with standard Arca-Swiss plate to DJI RS 2/RSC 2 gimbal directly.
• The Arca-Swiss base features anti-removal stud to prevent accidental fall off of the devices.
• Rack at the bottom for slight adjustment.
• Compatible with DJI RS 2/RSC 2 original Arca-Swiss plate and focus rod mount.
• Matte surface process to avoid reflections, perfectly matching the gimbal body.

Main Features

• Specially designed for DJI RS 2 / RSC 2 / RS3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers.
• Quick release design enables swift assembly and disassembly, facilitating rapid transitions between stabilizer and tripod setups.
• Anti-twist design of the Arca-Swiss quick-release plate for secure camera mounting ensures stability during operation.
• Features an adjustable anti-slip design of the Arca-Swiss quick-release baseplate to prevent accidental equipment detachment.
• A rail at the bottom allows for precise front-to-back sliding adjustments.

Main Features

• Battery Grip for Select RS Gimbals
• Provides up to 29.5 Hours of Power
• Supports 45W Fast PD Charge in 2.5 Hours
• 18W Maximum Power Output
• USB-C Port

Main Features

• For DJI RS 3 and RS 4 Pro Gimbals
• Focus Pro LiDAR, Focus Pro Motor
• Focus Pro Grip
• Carrying Case

Main Features

• Dedicated Arca-Swiss mount plate for DJI RS 3 mini, supports camera cage with a bottom Acra-Swiss plate.
• Lowers the center of gravity by 10mm, easier balancing, and compatibility with heavier cameras.
• One-second installation by simply inserting it vertically.
• Two anti-off buttons, stable, safe, and efficient.

Main Features

• Designed for SmallRig cages & DJI RS 2 and RSC 2 gimbal.
• Locks camera cage via two captive 1/4?-20 screws to prevent twists.
• Extended 10mm to increases the range for horizontal adjustments.
• Work with SmallRig BMPCC 4K cage for balance.
• Open access to most camera cage mounting screw

• 360° Protective Shell: Full-cover design shields the camera from impacts and scratches while maintaining perfect panorama stitching.
• Flip-Top Design: Engineered to work with premium lens guards for added scratch protection during shoots.
• Effortless Battery Access: Strategically placed side openings allow swift battery changes without removing the cage.
• Storage-Ready Lens Guard: Included silicone cover protects lenses when not in use (cage-mounted solution).

Main Features

• Effortless focus control with a smooth dial with step-less adjustment.
• Designed for DJI RS 2 / RS 3 Pro / RS 4 / RS 4 Pro, the handgrip supports various controls including shutter, recording, joystick control, mode switching, centering/locking, power/sleep mode, and more.
• Wide compatibility for attaching the original DJI phone holder, monitor, microphone, wrist strap, shoulder strap, and other accessories.
• Rapid assembly and disassembly for efficient shooting and convenient storage.

Main Features

• Designed for DJI RS 3/4 Pro Gimbals
• 76,800 Ranging Points
• Built-In Camera with 70? Field of View
• 65.6' Detection Range, 30mm Focal Length
• Wide-Angle and Telephoto Modes
• Flex Spot, ActiveTrack, Object Detect
• Works with Focus Pro Motor for Autofocus
• USB-C Input Ports
• Cold Shoe Mount, 1/4"-20 Thread

Main Features

• Extended Arca plate for DJI RS 2, RSC 2, RS3 & RS3 Pro gimbal.
• Locks camcorder or camera cage via two captive screws to prevent twists.
• Built-in magnetic flat-head screwdriver for easy assembly and disassembly.
• Extended 25mm to increase the horizontal adjustments.
• Thickness 15.5mm with a compact and low-profile design.

Main Features

• The DJI R Twist Grip Dual Handle is equipped with NATO ports to enable holding of DJI RS 2/DJI RSC 2 in various configurations, such as with both hands and briefcase mode.
• Compatibility: DJI RS 2, DJI RSC 2

Main Features

• Designed for DJI RS 3 Mini, with no shift of the center of gravity.
• Compact, weighs only 220g, easy to carry around.
• Multiple mounting points: 1/4 threaded holes and cold shoe mounts.
• Angle adjustable: tilts 0-180 degrees via a ratchet knob, easily folded for storage.

Main Features

• Specially designed for DJI RS 2 / RS 3 / RS 3 Pro; the shoulder straps together with the sling handgrip makes for easier shooting.
• Reduces burden on your arms in low-angle, high-angle, long-time standing shooting.
• Highly compatible: 1/4-20″ threaded hole, ARRI 3/8"-16 locating hole, cold shoe, and QD quick-release mount.
• Adjustable angle: handgrip tilts 0-180 degrees via a ratchet knob or acts as a side handle.
• Two slide buckles for easy adjustment of strap length.
• 1/4-20? and 3/8-16" threaded holes in the baseplate for tripods or other devices.

• Balances Camera on Gimbal
• For DJI X9-8K, Ronin 4D 6K or 4D 8K
• Rectangular, 10.4 oz Counterweight

Main Features

• Specifically designed mini NATO rail for attaching to DJI RS 2 / RS2 / RS3 / RS3 Pro / S3 mini / S4 / RS4 Pro stabilizers.
• Features a quick-release design for swift installation of accessories like the magic arm (ID 4490) and monitor mount (ID 4637).
• Equipped with a 1/4"-20 threaded hole for attaching accessories.
• Secures the stabilizers on both left and right sides with two M4 anti-deflection screws, protecting the stabilizer rail from scratches.

Main Features

• Specifically designed horizontal Arca-Swiss quick-release plate for DJI RS 2 / RSC 2 / RS3 / RS 3 Pro / RS 3 mini / RS 4 / RS 4 Pro. Can be directly mounted onto camera cages with an H38 Arca-Swiss quick-release plate at the bottom (ID 4481).
• The overall center of gravity is lowered by 9.5mm / 0.37in, facilitating easier leveling on the RS 3 mini stabilizer and enabling compatibility with heavier cameras.
• Features an adjustable anti-slip design of the Arca-Swiss quick-release baseplate to prevent accidental equipment detachment.
• Quick release design enables swift assembly and disassembly, facilitating rapid transitions between stabilizer and tripod setups.
• Anti-twist design of the Arca-Swiss quick-release plate for secure camera mounting ensures stability during operation.

Main Features

• Designed specifically for DJI RS 4 / RS 4 Pro / RS 3 / RS 3 Pro / RS 3 mini / RS 2.
• Crafted from lightweight carbon fiber for reduced weight and secure accessory attachments.
• Features anti-slip padding along the tube for a stable grip, enabling effortless shooting at different angles.

Main Features

• Bottom Mounting Pate
• For Select RS Gimbal Stabilizers
• Scale on Either Side
• Serrated Slot Design

Main Features

• For RS 3/4 Pro Gimbal Stabilizers
• Facilitates Focus Pro Motor FIZ Control
• Front Dial, Mode Button, Record Button
• 1.8" Touchscreen Display
• Mounts via NATO Clamp
• USB-C Communication Ports
• 2.4 GHz and Bluetooth Communication
• Built-In Rechargeable Battery

Main Features

• Lowers the center of gravity by 15mm, easier balancing, compatibility with heavier cameras, and no block to camera movement.
• Clear auxiliary leveling scale for quick balancing and switch between horizontal and vertical shooting.

Main Features

• Ergonomic Vest Supports up to 10kg Rig
• Two Handles for Ronin RS 2/C 2, RS 3/Pro
• Fits 85-130cm Waist Sizes
• Quick Release Buckle with Safety Button

Main Features

• Designed for DJI RS 3 Gimbal
• Mounts on Camera, Powers from Camera
• 43,200 Ranging Points
• Built-In Camera with 70-Degree Field of View
• 14m Detection Range, 30mm Focal Length
• Wide Mode and Spot Mode
• Works with Focus Motor for Autofocus

Main Features

• Designed for the DJI RS 2 Gimbal
• Stabilizer Arm with Support Vest
• Easy Assembly and Transport
• Wireless Thumb Controller and Receiver
• V-Mount Battery Plate
• Smartphone and Monitor Brackets
• Easy High and Low Modes

Main Features

• Design for DJI RS 2/ RSC 2 & Ronin-S and ZHIYUN gimbals.
• Balance front-heavy cameras on the gimbal.
• Clamps onto the rear of Manfrotto camera plate with thumbscrew.
• Multiple 1/4"-20 threaded holes for adding counterweights.
• 2 x 100g counterweights Included

Main Features

• Designed for DJI RS 2/RSC 2/ RS 3/RS3 Mini/RS 3 Pro
• Features 1/4°-20 & ARRI 3/8°-16 & cold shoe accessory mounts.
• Clamps to the side of RS 2/RSC 2 via quick-release NATO clamp.
• Anti-removal stud to secure the accessory from falling by accident.
• Compatible with original DJI RS 2 smartphone mount.
• Matte surface perfectly matches with the industrial design of gimbal.

Main Features

• Connects the camera's Micro-HDMI port with the Mini-HDMI port in the DJI Ronin RavenEye Image Transmission System
• Compatibility: Ronin-S, Ronin-SC, DJI RS 2, DJI RSC 2

Main Features

• Connects a camera with a Micro-USB port
• For the Camera Control Port of DJI RS 2/DJI RSC 2 for camera control
• Compatibility: DJI RS 2, DJI RSC 2

Main Features

• For Use with RS2, RS3 Pro

Main Features

• Allows Better Responsiveness to Quick Movements
• Works with Ronin-S, DJI RS 2, RS 3 Pro via Adapter Cable
• Works with Ronin 4D via DJI Ronin 4D Hand Grips Mount Universal Adapter

Main Features

• Enables Quick, Easy Camera Mounting
• Arca- and Manfrotto-Type Compatible
• Lever Release and Safety Lock
• For Horizontal and Vertical Mounting

Main Features

• Foldable Handle for RS 5 Gimbal
• Enables Single-Handed Operation
• Joystick and Button Controls
• Bluetooth Shutter Control
• Shoe Mount, 1/4"-20 Accessory Thread
• Create Low-Angle Shots

Main Features

• ActiveTrack & Centre Tracking Modes
• Intelligent Subject Reframing
• Keep Current Framing Mode
• Tracks People, Pets & Vehicles
• Tricolour LED Ring Status Indicators
• Tracks Person up to 10m Away
• Joystick, Touchscreen & Gesture Control
• Orbit, POV, Backward Shot Tracking
• Magnetic Mounting Design

Main Features

• For RS 5 Gimbal
• Grip with Integrated Battery
• Up to 14-Hour Runtime
• Charges in 1 Hour with 65W PD Charging
• USB-C Charging Port

Main Features

• Enables Quick, Easy Camera Mounting
• Arca- and Manfrotto-Type Compatible
• Adjustable Placement Guide
• D-Ring and 1/4"-20 Screws, Safety Lock

• For Ronin 2, Inspire 2, and Ronin 4D
• 4280mAh Capacity | 22.8V
• 2-Hour Ronin 4D Runtime with 2 Batteries
• LED Indicators

• Attaches to Back of Ronin 4D Cameras
• SDI Output, Timecode, Audio Inputs
• 48V Phantom Power
• Proprietary Connector, Mounting Screws