IDX DUO-C198P 193Wh High-Load Li-Ion V-Mount Battery

IDX DUO-C198P 193Wh High-Load Li-Ion V-Mount Battery

The DUO-C198P has a high capacity of 193Wh and is capable of a maximum output of 154W / @ 14A 11V. Strongly supports long-time shooting with 4K cinema cameras such as 4K camera (V mount) + recorder (D-Tap) + small monitor (D-Tap) and camera systems with high power consumption including peripheral devices. increase. In addition, it is a battery with a capacity approaching 200Wh, but with a mass of 1090g, which is easy to handle.

Anti-virus / antibacterial processing

Consideration for hygiene and peace of mind because it is something that everyone touches! The exterior of the DUO-CP series battery is treated with anti-virus and anti-bacterial treatment, which has the effect of reducing viruses and suppressing the growth of bacteria. (Applied to the main body case and label (excludes the serial number label) Note: This product is not a pharmaceutical product. Nor does it guarantee infection prevention. The antiviral performance test (ISO21702) and antibacterial test (JIS Z 2801) have been conducted, but it is a verification test for specified viruses and bacteria, not for all viruses and bacteria.

D-Tap

The DUO-CP series has two D-Taps that can supply power to small lights and power-saving monitors. The maximum output per location is 80W, and the battery voltage is output through. D-Tap2 (D-Tap Advanced) has a charging compatible function and can be charged using the dedicated charger VL-DT1. It can be charged with the small and fastest PD charger UC-PD1.

For business trips and shooting where you don't want to bring a bulky charger, you can make your luggage more compact with a small charger. The UC-PD1 is a cable-integrated AC charger that supports the Power Delivery standard and can charge IDX batteries equipped with a USB PD terminal. It supports USB PD output up to 65W, and can also charge laptops, tablets, and smartphones equipped with a Type-C port. Charging according to the USB PD standard automatically switches the output voltage according to the connected device and charges with the optimum power.

USB Type-C PD compatible

• Equipped with a USB Type-C PD connector that supplies various devices with PD charging.
• It is compatible with PD60W, which is the largest class of commercial batteries.
• It is also possible to charge tablets, smartphones and notebook PCs.
• Power supply of 60W (5V 3A / 9V 3A / 12V 3A / 15V 3A / 20V 3A) is possible.
• It can be charged with the USB PD charger UC-PD1.
• It is a combination that is small and not bulky, has the fastest charging, and is recommended for business trips.

V-Torch (LED light)

Convenient when attaching the battery to a camera, etc. for night photography. If you press the remaining amount display button twice in a row, it will turn ON / OFF and you can illuminate the mount part. And since it turns off automatically (about 10 seconds), you can use it with confidence without forgetting to turn it off.

Communication settings

The remaining battery level can be displayed on the viewfinder of the camera. You can set it to SB mode or IB mode by pressing and holding the remaining amount display check button. Battery information such as remaining capacity can be read by using it with a device that supports each mode. * It may not be supported depending on the camera model.

Mount / Series Type V-Mount

Chemistry Lithium-Ion

Capacity (Wh) 191 Wh

Amp-Hours 13.24 Ah

Output Voltage 14.54 VDC

Maximum Load 14 A

Over-discharge prevention cutoff function standard equipment (output stopped at 11V)

D-Tap output 2 systems / USB PD [Type-C] input / output 1 system

D-Tap Advanced (D-Tap charge compatible function)

USB PD input / output voltage / maximum power: [5A 3A / 9V 3A / 12V 3A / 15V 3A / 20V 3A] 60W

Storage Temperature -4 to 122°F / -20 to 50°C

Charging Temperature 32 to 104°F / 0 to 40°C

Discharging Temperature -4 to 122°F / -20 to 50°C

IP Rating None

Dimensions (W x H x D) 3.8 x 5.7 x 2.3" / 9.65 x 14.48 x 5.84 cm

Weight 2.4 lb / 1.09 kg 

The remaining amount display is in 10 stages.
(5 levels are displayed when charging with USB)

PowerLink can be performed at the end of the IPL Battery (IPL-150, IPL-98).
* PowerLink between DUO-C198Ps is not possible.