LD Systems ANNY 10 Specs
Portable PA System
Speaker Configuration 1x 2-Way Loudspeaker
Number of Input Channels 6 (2 x Mono, 2 x Stereo)
Amplifier Power Rating Total: 1x 80 W RMS
Amplifier Class Class-D
Speakers
Enclosure Type Speaker: Bass-Reflex
HF Driver 1x 1" / 25 mm
HF Voice Coil 1" / 25 mm
LF Driver 1x 10" / 25.4 cm
LF Voice Coil 2" / 51 mm
Magnet Ferrite
Speaker Sensitivity 111 dB SPL (Typical) 118 dB SPL (Max)
Signal Processing
Crossover 1800 Hz
Input Pad No
EQ 3-Band Graphic
Semi-Parametric EQ No
Effects Delay Reverb
Filters No
Dynamic Processing No
Microphone
Microphone Type 2x Handheld
Capsule Dynamic
Polar Pattern Cardioid
Muting Off/On Switch
Performance
Frequency Response 45 Hz to 20 kHz
Maximum SPL 118 dB SPL (Peak) 111 dB SPL (Continuous)
Coverage Angle 90° H x 50° V
Input Sensitivity 1/4" / XLR Mic/Line Input:
Connectivity
Audio I/O
2x Combo XLR-1/4" TRS Mic/Line Input
2x RCA Coaxial Line Input
1x 1/8" / 3.5 mm TRS Aux Input
1x XLR 3-Pin Mix Output
USB I/O 1x USB-C (Device Charging)
Mobile App Compatible No
Network I/O No
Wireless Connectivity Bluetooth
Wireless
Wireless Transmission Handheld Transmitter: UHF
Max Wireless Range 262.5' / 80 m
Number of RF Channels 12
RF Frequency Band Handheld Transmitter: 655 to 679 MHz
RF Bandwidth 30 MHz
Form Factor Transmitter: 2x Handheld
RF Output Power 10 mW
Max Number of Simultaneous Transmitters 2
Diversity Non-Diversity
Antenna 1x Built-In
Bluetooth 5.0
Power
Battery Type System: Rechargeable 12 V Lead-Acid (Replaceable) Handheld Transmitter: 2x AA
Approximate Battery Life 5 to 25 Hours
Battery Charging Time 7 Hours
Internal Battery Capacity System: 5 Ah
AC Input Power 100 to 240 VAC, 50 / 60 Hz (T 2 A L 250 V)
Power Consumption 150 W
AC Power I/O 1x IEC Input
Physical
Transport Options 1x Telescopic Handle 2x Wheels
Mounting 1 x 1.4" / 35 mm Pole Socket
Construction Material Polypropylene
Environmental Resistance No
Operating Temperature 32 to 104°F / 0 to 40°C
Operating Humidity 80%
Weight 41.27 lb / 18.72 kg