Roland VC-1-SH SDI to HDMI Video Converter

Roland VC-1-SH SDI to HDMI Video Converter

The Roland VC-1-SH SDI to HDMI Video Converter allows SDI video to be monitored using relatively inexpensive HDMI-equipped displays, and can also serve as an audio embedder and de-embedder. The internal processing has been designed to faithfully preserve the incoming SDI signal and frame rate without introducing interlacing artifacts, signal errors, or reducing the dynamic range of the image. The SDI signal is re-clocked before processing to help ensure the best performance.

The VC-1-SH features an SDI input that supports 3G-SDI, HD-SDI, and SD-SDI. A hybrid balanced stereo analog and AES3 audio input allow additional audio sources to be embedded in the HDMI output. For local monitoring there is an HDMI out that can be used with standard, consumer-grade HDMI displays. In addition, there is an SDI loop-out that also passes any newly embedded audio. A hybrid analog/AES audio output allows you to locally monitor any embedded audio in case the audio output is not provided by the HDMI display--this includes audio embedded within the VC-1-SH.

Two 1/4" TRS inputs forming an L/R stereo pair allow a balanced analog or AES3 digital audio signal (using only the "R" input) to be embedded in the SDI stream, along with any existing embedded audio. Once embedded, the audio is passed to the HDMI output as well as the SDI loop-out. In addition, all embedded audio is output through two more 1/4" TRS jacks either as stereo analog or AES3 digital (through the "R" output). This feature means the VC-1-SH can serve as a standalone audio embedded/de-embedder as well as a video converter.

Re-clocking is applied to the SDI inputs. Reclocking rebuilds the signal following attenuation due to longer cable runs and is designed to help ensure error-free performance as well as minimise signal dropouts.

As part of the SMPTE 424M specifications, Level A transports up to 60 progressive frames while Level B implements a multiplexing scheme that combines two streams of 50 or 60 Hz interlaced video. Support for both variants helps ensure this device will be widely compatible with 3G-SDI video equipment.

Using the VC-1 RCS control application, available for free download from Roland, you can configure the VC-1-SH with more refined parameters than are available on the unit itself.

Inputs

1 x 3G-SDI on BNC female
2 x Analog audio on balanced 1/4" TRS female - L/R stereo pair
1 x Digital audio on balanced 1/4" TRS female - shares input with "R" channel analog input

Output

1 x 3G-SDI loop-out on BNC female
1 x HDMI
2 x Analog audio on balanced 1/4" TRS female - L/R stereo pair
1 x AES/EBU digital audio on balanced 1/4" TRS female - shares input with "R" channel analog input

SDI Standards

SMPTE 424M (Level A and B), 425M-AB, 299M, 296M, 292M, 274M, 272M-C, 259M-C; ITU-R BT.601-5

Audio Formats

SDI: Linear PCM; 24-bit, 48 kHz, 16 channels
HDMI: Linear PCM; 24-bit, 48 kHz, 8 channels AES/EBU: 110 ohm; AES3; 16 or 24-bit, 32 or 48 kHz, 2 channels
Analog Input: 110 ohm; +4 to +24 dBu
Analog Output: 600 ohm; +4 dBu

Supported Resolutions

1920 x 1080: 60p, 59.94p, 50p, 30p/29.97p, 25p, 24p, 23.98p, 60i, 59.94i, 50i
1280 x 720: 60p, 59.94p, 50p, 30p, 29.97p, 25p
720 x 576: 50i
720 x 480: 59.94i

USB

1 x USB 2.0 type B

Power Requirements

9 VDC

Power Consumption

8 W

Operation Temperature

32 to 104˚F / 0 to 40˚C

Dimensions

5.9 x 5.1 x 1.2" / 15.1 x 13 x 3 cm

Weight

1.1 lb / 0.5 kg