Audio-Technica AT2020 Cardioid Condenser Microphone + AT8700 Boom Arm Bundle

Audio-Technica AT2020 Cardioid Condenser Microphone + AT8700 Boom Arm Bundle

•  
  Audio-Technica AT2020 Cardioid Condenser Microphone (Black)

  The Audio-Technica AT2020 Cardioid Condenser Microphone in black is made to enable podcasters, musicians, and content producers to record at home with sonic quality that is distilled from the company's renowned studio condensers. When tracking in untreated environments, the capsule's low-mass, side-address diaphragm and cardioid polar pattern help to reject ambient noise and background noise. It has a pivoting stand mount that allows for simple attachment to your current mic stand.

  The versatility to precisely recreate signals from a range of sources, such as voices, speech, and instruments, is made possible by the AT2020's extended, linear frequency response. The AT2020 can capture loud sounds with a minimum amount of noise and distortion thanks to its high SPL handling and wide dynamic range. The AT2020 is a solid-state condenser with an XLR output, meaning it needs to be connected to a mic preamp with an XLR that can supply 48V phantom power.

   

  Studio Quality at Home

  This side-address cardioid condenser mic is built for longer frequency response and enhanced transient response and is intended for home/project studio applications. The AT2020 is perfect for artists, streamers, podcasters, and other content creators because to its studio-quality articulation and intelligibility.

  Cardioid Polar Pattern

  The cardioid polar pattern of the AT2020 allows it to record your voice or instrument with less background noise since it predominantly picks up sound in front of the mic while being far less sensitive to sound behind the mic.

  Ready for Daily Use

  The AT2020 offers dependability, high SPL handling, and a broad dynamic range in addition to its tough build and high-performance characteristics. It includes a protective pouch, an adapter for 3/8"-16 threaded stands, and a space-saving stand mount for 5/8"-27 threaded stands.

  Features at a Glance

  • Custom-engineered 0.6" low-mass diaphragm
  • Extended frequency response and superior transient response
  • High SPL handling and wide dynamic range provide great versatility
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source
  • Stand mount allows placement in tight spots
  • Operates on 48 VDC phantom power from a range of devices such as portable mixers, desktop audio interfaces, or external mic preamps
  • Balanced XLR 3-pin output connector
•  
  Audio-Technica AT8700 Adjustable Microphone Boom Arm

  Content creators can mount their favorite microphone on the Audio-Technica AT8700, a sturdy and fully adjustable boom arm that clamps to the edge of your table, freeing up space on your desktop. With full 360° rotation that facilitates any mic position, use the arm to place your mic where you want it, and keep it firmly in place while you stream games, podcasts, records, and more. The AT8700 comes with six USB cable clips and six XLR cable clips to reduce clutter and a table clamp.

  Features

  • Table-mount microphone boom arm with 5/8"-27 thread
  • Full 360° rotation
  • Includes USB cable clips (6), XLR cable clips (6), and table C-clamp

•  
  Audio-Technica AT2020 Cardioid Condenser Microphone (Black)

  Primary Applications

  Studio Recording

  Form Factor

  Large Diaphragm Mic / Stand/Boom Mount

  Intended Sound Sources

  Vocals, Speech/Voice Over, Instrument

  Sound Field

  Mono

  Operating Principle

  Pressure Gradient

  Capsule

  Electret Condenser

  Diaphragm

  0.6" / 16 mm

  Polar Pattern

  Cardioid

  Orientation

  Side Address

  Circuitry

  Solid-State

  Frequency Range

  20 Hz to 20 kHz

  Maximum SPL

  144 dB SPL (1 kHz, 1% THD)

  Impedance

  100 Ohms

  Sensitivity

  -37 dBV/Pa (Open Circuit Voltage)

  Dynamic Range

  124 dB (Typical, 1 kHz, at Max SPL)

  Signal-to-Noise Ratio

  74 dB A-Weighted (1 kHz, at 1 Pa/94 dB SPL)

  Equivalent Noise Level

  20 dB SPL A-Weighted

  Output Connectors (Analog)

  1 x XLR 3-Pin Male (on Mic)

  Operating Voltage

  48 V (Phantom Power)

  Operating Current Consumption

  2 mA

  Colour

  Black

  Mounting

  Mic Clip/Stand Adapter (Included)

  Included Case

  Zipper Pouch

•  
  Audio-Technica AT8700 Adjustable Microphone Boom Arm

  Form Factor Studio Microphone Arm with Mount

  Color Black

  Thread Size 5/8"-27

  Rotation Range 360°

  Cable Management External Cable Clip

  Mounting Type C-Clamp (Included)