Benro Tortoise Carbon Fibre 2 Series Tripod System with S4Pro Video Head

Benro Tortoise Carbon Fibre 2 Series Tripod System with S4Pro Video Head

The Tortoise Carbon Fiber 2 Series Tripod System with S4Pro Video Head from Benro is a portable travel-friendly system that supports up to 8.8 lb loads and has a working height range of 8.86 to 62.4". The head features a flat base, which makes it well suited to sliders and jibs, while the legs have a levelling ball to flat base head fitting, allowing you to mount the S4Pro to the legs and take advantage of the quick levelling capabilities of a ball base. The carbon fibre legs utilize twist locks leg locks for fast and secure setup. The head fitting on the legs incorporate a 1/4"-20 accessory mounting port, allowing you to attach a variety of accessories. The carbon fibre legs feature independent movement with three locking angles and a push-button locking system. The rubber feet feature three distinct contact surface providing a grip whether the legs are vertical, on an angle, or nearly horizontal when positioned. You can remove the rubber feet and replace them with the included spiked feet if you wish.

The S4Pro head has two steps of counterbalance and features fixed pan and tilt drag and has independent pan and tilt locks. The tilt range is +90/-65°, while the pan range is a full 360°. The included camera plate can be adjusted forward/backward to let you find the optimal balance for your camera. An integrated safety catch helps ensure that the plate doesn't accidentally slide free and introduce your camera to the effects of gravity. Two camera screws are supplied—1/4"-20 and 3/8"-16—that can be stored underneath the camera plate on the head itself, in dedicated slots. For attaching accessories, there's a 1/4"-20 threaded hole on each side of the head to which you can secure articulating arms.

Camera Plate

Camera Plate Features Sliding Balance Plate

Camera Mounting Screw 1 x 1/4"-20 Male 1 x 3/8"-16 Male

Safety Lock Yes

Plate Dimensions 4.13 x 1.97" / 10.49 x 5 cm

Head

Base Mount 3/8"-16 Female Flat Base

Counter Balance Incremental 2-Step

Pan Handle Fittings 2 x Rosette

Bubble Level 1

Accessory Mounting 2 x 1/4"-20 Female Thread

Pan & Tilt

Drag Control Pan: Fixed Tilt: Fixed

Drag Type Fluid

Vertical Tilt +90° to -65°

Panning Range 360° Independent Pan Lock Yes

Independent Tilt Lock Yes

Legs

Leg Lock Type Twist Lock

Leg Positions 3 Positions

Independent Leg Spread Yes

Leg Sections 4

Leg Diameter 1.13" / 28.6 mm 0.99" / 25.2 mm 0.86" / 21.8 mm 0.72" / 18.4 mm Feet

Features Rubber, Removable, Spiked

Spreader None

General

Load Capacity 8.82 lb / 4 kg

Maximum Working Height 62.4" / 158.50 cm

Minimum Working Height 8.86" / 22.50 cm

Folded Length 25.39" / 64.5 cm

Materials Aluminum, Carbon Fiber

Weight 5.47 lb / 2.48 kg