DECIMATOR DMON-16S 16-Channel Multi-Viewer with SDI & HDMI Outputs
Main Features
- 1-16 Channel Multi-Viewer
- 16-1 Channel Multiplexer
- 16x 3G/HD/SD-SDI Inputs
- LCD Menu Access (No Need for Computer)
- 8-Channel Audio Metering
- 1x SDI / 1x HDMI Outputs
- RS-422 and RS-485 Support
- Simultaneous Multi-Format/Rate Display
- Select Presets / Create Custom Layouts
- Up to 32 GPI
Special Notice
DECIMATOR DMON-16S 16-Channel Multi-Viewer with SDI & HDMI Outputs
4 x
$445.00from
$104 x
$445.00Main Features
- 1-16 Channel Multi-Viewer
- 16-1 Channel Multiplexer
- 16x 3G/HD/SD-SDI Inputs
- LCD Menu Access (No Need for Computer)
- 8-Channel Audio Metering
- 1x SDI / 1x HDMI Outputs
- RS-422 and RS-485 Support
- Simultaneous Multi-Format/Rate Display
- Select Presets / Create Custom Layouts
- Up to 32 GPI
Special Notice
-
What's in the box
- Universal Power Supply
- HDMI Cable
- USB Cable
- Limited 3-Year Warranty
DECIMATOR DMON-16S 16-Channel Multi-Viewer with SDI & HDMI Outputs
DECIMATOR DMON-16S 16-Channel Multi-Viewer with SDI & HDMI Outputs
The DECIMATOR DMON-16S Multi-Viewer with SDI & HDMI Outputs can be used either as a 1-to-16-channel multi-viewer or 16-to-1-input multiplexer supporting up to 1080p@60/59.94/50Hz on input and output. A miniature multi-viewer with front-panel LCD menu access, the DMON-16S is suitable for both on-location and studio applications, as you won't need to use a computer or DIP switch to make selections and adjust settings.
The DMON-16S offers 8-channel audio metering overlay per window with individual enables, custom positioning, and size, and it features 1 3G/HD/SD-SDI output and 1 HDMI output. RS-422 and RS-485 support additionally allow you to select tally display and control the UMD position and size.
Multi-View output mode lets you select and display inputs with different formats and frame rates at the same time, and Pass-Through mode allows any of the 16 inputs to be selected for output via the SDI and HDMI outputs. You can select from preset display layouts or create and save your own custom layouts, and with up to 32 GPI you can interface with additional devices for tally and remote switching.
Key Features
The DMON-6S is a small form factor 3G/HD/SD-SDI 1 to 6 channel Multi-Viewer or 6 to 1 input multiplexer/portable converter, that incorporates an LCD and button control to set up and control the unit.- 6 x (3G/HD/SD)-SDI active loop copies of each input
- Custom Layouts with various standard layouts
- 16 Character UMD overlay per window with individual enables, custom positioning and size
- 16 Channel Audio Metering overlay per window with individual enables, custom positioning and size
- Safe Action and Safe Title overlay per window with individual enables and adjustment
- Centre Cross overlay per window with individual enable
- Audio ID overlay
- Tallies can be applied to either Tally Boxes (Default), Outside Safe Action Area or Border
- Tally boxes allow for up to 4 Tallies per window (Green, Red, Blue and Yellow)
- Load and restore Custom Layouts
- Fast switching between inputs using Full-Screen scaling
- Selectable output format in both Full-Screen and Multi-Viewer mode
- Low latency buffering for each input allowing non-synchronous inputs
- Linked (3G/HD/SD)-SDI and HDMI outputs
- 6 x (3G/HD/SD)-SDI inputs with auto-detection (6 Formats supported in total)
- Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
- Variable aspect ratios per quadrant
- Pass-Through mode allowing any of the 6 inputs to be selected for output
- In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI and HDMI outputs
- the unit supports:
- 32 GPI on 37-pin D-SUB connector for Tallies and Remote Switching
- RS422/485 on 37-pin D-SUB connector for Dynamic UMD and Tallies via TSL protocol
- USB port for control and firmware updates
The unit features a threaded locking power connector that helps guard against kick-outs.
